Hysys软件使用介绍课件.ppt

* * - Tell them that they can use this page as a guide when doing the following workshop. * - Tell them that they can use this page as a guide when doing the following workshop. * Stream - Composition basis can be changed. - If using a -FRAC basis, then total flowrate is needed. - If fractions don’t add up to 1, then there will be a warning and values will be normalized. - Note that pressure can be in absolute or gauge units (new for 9.3). - Show the two different ways to get to the stream input, other than the next key (I.e. from the Data menu and from the graphical worksheet). - Show the units at the top of the input form. * * * * Block input - For each block, there is both required and optional information. * * * tools ? Utilities ? Property Table 等值线 横坐标 纵坐标 每次上课练习结果提交： 所有结果用WinRar软件压缩打包 提交文件名：“学号+姓名+第？章.rar 提交地址：hgsj06@163.com 主题：化工设计作业（第？章） （必须） 需收到自动回复方可确定提交成功！若无自动回复，请检查邮箱名称后再发。 来不及完成的练习，最晚提交时间不得晚本周日晚11时(以邮件发送时间为准 过期限再后提交-1分/次，未交-2分/次) 内容错误享受 “未交” 待遇 内容不全享受 “迟交” 待遇 提交文件要求： 考勤： 2011010001张三.doc 作业： 2011010001张三 （第2章）.rar 如果分次提交，请再标注 * * * * * * * * * * * * * * * * - This workshop builds on the graphical flowsheet created in the last workshop. - Optional part is for those who finish early. It is not necessary to complete them. * Remind them to save the file since it will be used in the next workshop. * * * * * Components Main form - show partial matching - search for a component by name and by formula - mention type of component - different databanks - spacebar clears a field * * * * * * * 3. 选择单位集 从tools菜单中选择Preference。 点击variables表页。 4. 添加物流 使 用 用 法 菜单栏 ·从流程菜单中选添加物流选项，或者 ·按热键F11 物流性质窗口打开 工作薄 打开工作薄，到材料物流表页，在“New*”框中输入物流名称 对象面板 从流程菜单中选打开对象面板选项，或按F4打开对象面板，双击物流图标 4. 添加物流 五、物性包的选择 在“Property Package Selection”组中，用户可以接触导Hysys中所有能用的物性方法，还可以访问“Property Package Filter”组 Property Package Filter (物性包过滤器)可使用户对所有可用的物性方法做一过滤，其过滤所依照的标准如下表: 过滤器 描 述 All 显示名单上所有的物性包 EOSs 仅显示状态方程型的物性包 Activity Models 仅显示液体活度模型物性包 Chao Seader 仅显示Chao Seader 法等基于半经验公式的模型