GPRS复习资料优化基础.ppt

GPRS技术交流 RNO 2006年5月 目录 GPRS LOAD counter介绍 Alcatel 8版时隙分配介绍 KPI分析 参数简介 案例分析 Gprs Load counter 介绍 DSP LOAD 1、p384 Counter Definition : DSP congestion duration(in seconds). Trigger condition: Started: when a DSP of a GPU enters the congestion state either because the maximum number of PDCHs or the maximum number of GCHs or the maximum number of TRXs(i.e. PDCH groups)that can be managed by a DSP is reached, Stopped: when all DSP have left the congestion state. Gprs Load counter 介绍 2、p74 Counter definition: Number of LLC PDUs transmitted in DL during one granularity period. Trigger condition: For each LLC PDU transmitted to PTU(discarded PDUs are not counted). Gprs Load counter 介绍 Ater LOAD 1、p383a Counter definition: Atermux congestion duration due to a lack of GCH_16 transmission resources on the Atermux interface. Trigger condition: Started:when a GPU enters the Atermux congestion state, Stopped:when a GPU leaves the Atermux congestion state. Gprs Load counter 介绍 2、p150g Counter definition: Maximum number of established PDCHs(i.e. equipped with a GCH transmission resource in the sub-BSS). Remark: An established PDCH is a usable PDCH with allocated transmission resources. Gprs Load counter 介绍 PMU load 1、p77a Counter definition: Maximum value of the PMU CPU power budget observed during the granularity period. Trigger condition: Tidemark of the counter p76a. p76a:Average PMU CPU power budget observed during the granularity period. Gprs Load counter 介绍 2、p402 Counter definition: Cumulative time during which the GPU stays in the PMU CPU overload state due to PMU CPU power limitations. Trigger condition: Tidemark of the counter p76a. p76a:Average PMU CPU power budget observed