centos拨号上网.doc

1.查看装没装拨号软件：[root@www root]# rpm -qa|grep pppoerp-pppoe-3.5-32.12.查看adsl-setup命令在哪：[root@www root]#whereis adsl-setupadsl-setup: /sbin/adsl-setup /usr/sbin/adsl-setup /usr/share/man/man8/adsl-setup.8.gz也可以在“位置”“搜索”里搜pppoe查看更多信息。3.设置拨号：[root@www root]# /sbin/adsl-setup (不知道是不是我的有问题，不能直接adsl-setup,种是找不到命令)首先，你会看到欢迎信息。 Welcome to the ADSL client setup. First, I will run some checks on your system to make sure the PPPoE client is installed properly... 然后要求我们输入登陆名。LOGIN NAME Enter your Login Name (default root): （这里填宽带连接的用户名）接着，要求我们选择使用的网络接口。我们这时候，填入我们刚刚设置的那个网卡。对于大多数只有一个网卡的朋友而言，默认eth0就可以了。 INTERFACE Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0. For Linux, it will be ethX, where X is a number. (default eth0): （eth0）接下来，询问的是，adsl连接以后，是否持续保持连接。或者是自动的断开，在指定的时间（以秒数计算）内。多数情况下，我们希望手动的打开关闭连接。所以这里选择默认的no。 Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter no (two letters, lower-case.) NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links. Enter the demand value (default no): (no)再下来，就是dns了。我发现很多时候，pppoe都不能够正确获取dns信息。我建议你输入dns地址。这些信息在isp的网站上一般都有公布。 DNS Please enter the IP address of your ISPs primary DNS server. If your ISP claims that the server will provide dynamic DNS addresses, enter server (all lower-case) here. If you just press enter, I will assume you know what you are doing and not modify your DNS setup. (server)帐号密码是必须，输入两次。密码显示风格和其他的地方一样，不显示在屏幕上。这个，我不知道改怎么填写。太高深的问题了。希望你将你的答案和我分享。：P。 PASSWORD Please enter your Password: (宽带连接密码)Please re-enter your Password: 下面的设置，是表示是否允许普通用户启用/关闭 ADSL连接。默认是允许。 Please enter yes (two letters, lower-case.) if you want to allow normal user to start or stop DSL connection (default