基于LabVIEW的LED结温特性测量仪(中山大学).docVIP

本 科 生 毕 业 论 文 题 目：院 系： 专 业： 学生姓名： 学 号： 指导教师： （职 称） 二〇〇 年 月  摘要 ATMEL增强型FLASH单片机作为主处理器以完成主要的测控任务 关键词： Abstract Base on the electronic technique to measure the junction temperature of the GaN_based white LEDs, we get a exact data. This method use the linear programming between positive voltage and temperature of PN_junction. This system take the Atmel AT89S52 microcontroller which is low-power, high-performance and with 8K Flash bytes of in-system programmable Flash memory as the control center. The MCU choose the different channels of the CD4051 chip to control the voltage-controlling current source, which can has various current output. And at the same time, the MCU start up the AD converter to get the voltage of PN_junction during different current. The voltage data processed by MCU is send to the PC via RS485 bus. The software on PC is written by LabVIEW, which have graphical interfaces capability. The software communicate with the MCU to process command and parameter. This system is used to test GaN_based white LEDs, and the testing result is all right Keywords: white LEDs, junction temperature, LabVIEW第一章 前言…………………………………………………………………….......1 第二章 大功率LED特性及LabVIEW综述...……………………………..……..2 2.1 大功率LED特性……………………………………………………………….2 2.1.1 LED的工艺特性……………………………………………………...2 2.1.2 LED的优缺点………………………………………………………...2 2.1.3 LED的实际应用以及急需解决的问题……………………………...3 2 .2 LabVIEW简介………………………………………………………………....3 2.2.1 LabVIEW的编程语言特点…………………………………………..4 2.2.2 虚拟仪器的概念……………………………………………………...5 第三章 结温测量仪整体系统设计………………………………………………...5 3.1 结温测量仪的原理……………………………………………………………..5 3.2 硬件设计方案…………………………………………………………………..5 3.2.1 各部分硬件功能简述……………………………………………….. 5 3.2.2 硬件电路器件参数确定……………………………………………...6 3.3 软件设计方案………………………………………………………………......6 3.3.1 LabVIEW平台特性……………………………………………….....6 3.3.2 PC机程序整体框架以及各部分功能模块划分……………….........7 3.3.2.1 上位机软件操作流程……………………………….........7 3.3.2.2