快速响应热电偶焊接技术与性能研究-毕业论文.docVIP

兰州交通大学 毕 业 设 计 论 文 题　　目： 快速响应热电偶焊接技术与性能研究 学　　院： 机电工程学院 专　　业： 材料成型及控制工程 指导教师： 徐立新 老师 班　　级： 成型091班 姓　　名： 安志龙 学　　号： 200904923 摘 要 热电偶是工业上最常用的温度检测元件之一，Abstract Thermocouple is one of the most commonly used temperature detecting element in industry, is through the measure to realize the temperature measurement, thermoelectric emfs is thermocouple temperature measurement based on the transformation of thermoelectric potential phenomenon - thermoelectric phenomena. If further analysis, it can be found that the thermocouple is a kind of transducer, it is to convert thermal energy into electric energy, using thermoelectric emf generated by the temperature measurement. The electromotive force is actually made contact potential (Peltier potential) with differential electric potential (Thomson potential). But sometimes because of poor contact of welding joint can make the thermocouple measurement caused great error, but also can reduce the sensitivity, affect the measurement result. Integrated temperature measurement technology are discussed this paper, the basic principle of thermocouple, hot I welding joint performance of hot I sensitivity, the influence of some key thermocouples welded joint welding technology in a more comprehensive study. Paper first introduces some temperature measuring method. Secondly by contrast method for hot accidentally welding joint properties are compared. Comprehensive data analysis, the best fitting out of the homemade thermocouple fitting curve, and carries on the analysis and conclusion is summarized. Key words: Thermocouple，Temperature measuring technology，The basic principle， Fitting curve  目 录 摘 要 I Abstract II 第一章 绪论 3 第一节 温度测量概述 3 一、温度 3 二、温标 3 三、温度测量的基本原理 4 第二节 温度测量的方法 4 一、温度计的选择 4 二、温度测量方法分类 5 三、接触式测温方法原理及特点 6 四、非接触式测温方法原理及特点 7 五、温度测量