【精选】Setting up your PPTP under Mac OS X 10.docVIP

Setting up your PPTP under Mac OS X 10.10 Setting up PPTP access under Mac OS X 10.5 is simple. The following instructions go step–by–step through the creation process. System Requirements Before setting up the PPTP, be sure your installation is up–to–date by running Software Update. At the time of this writing the latest Mac OS X version was 10.10 Open the Network Control Panel First, open the System Preferences by going to the Apple menu and choosing System Preferences. Or choose System Preferences from the Dock. Next, click on the Network system preference. Make a new connection In the Network system preference there is a list of network connections on the left side. Click the + icon (hilighted in red) to make a new connection for the PPTP.(www51yueyoucom) Set the Interface to PPTP and set the Connection Type and Name(www51yueyoucom) When you click the + icon, a new service sheet appears. Click on the Interface popup menu to see the list of choices In the list, select PPTP. The PPTP Type should automatically be set to PPTP, as seen in the picture below. Server Address: Enter the yueyou IP address For the PPTP to work effectively, the Send all traffic over PPTP connection checkbox should be marked when you want to connect to the PPTP, you can either choose the PPTP configuration from the PPTP menu or select your PPTP connection in the connection list and click the Connect button.