BICC协议规范.doc

INTERNATIONAL TELECOMMUNICATION UNION ITU-T Q.1902.1 TELECOMMUNICATIONSTANDARDIZATION SECTOROF ITU (07/2001) SERIES Q: SWITCHING AND SIGNALLING Specifications of signalling related to Bearer Independent Call Control (BICC) Bearer Independent Call Control protocol (Capability Set 2): Functional description ITUT Recommendation Q.1902.1 (Formerly CCITT Recommendation) ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1–Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING Q.4–Q.59 FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN Q.60–Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100–Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4 AND No. 5 Q.120–Q.249 SPECIFICATIONS OF SIGNALLING SYSTEM No. 6 Q.250–Q.309 SPECIFICATIONS OF SIGNALLING SYSTEM R1 Q.310–Q.399 SPECIFICATIONS OF SIGNALLING SYSTEM R2 Q.400–Q.499 DIGITAL EXCHANGES Q.500–Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600–Q.699 SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Q.700–Q.799 Q3 INTERFACE Q.800–Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850–Q.999 PUBLIC LAND MOBILE NETWORK Q.1000–Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100–Q.1199 INTELLIGENT NETWORK Q.1200–Q.1699 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1700–Q.1799 SPECIFICATIONS OF SIGNALLING RELATED TO BEARER INDEPENDENT CALL CONTROL (BICC) Q.1900–Q.1999 BROADBAND ISDN Q.2000–Q.2999 For further details, please refer to the list of ITU-T Recommendations. ITU-T Recommendation Q.1902.1 Bearer Independent Call Control protocol (Capability Set 2): Functional description Summary This Recommendation provides a functional description of the Bearer Independent Call Control (BICC) protocol for the support of narrowband ISDN services independent of the bearer technology and signalling message transport technology used. Source ITUT Recommendation Q.1902.1 was prepared by ITUT Study Group?11 (20012004) and