【精选】大直径超深立井凿井井架的选型 及结构优化研究.pdfVIP

Mine Engineering 矿山工程, 2015, 3, 118-127 Published Online July 2015 in Hans. /journal/me /10.12677/me.2015.33017 Large Diameter Deep Shaft Sinking Headframe Selection and Structure Optimization Research 1 2 1 2 1 Jianmin Du , Weiqing Ma , Shuai Wang , Yin Ma , Zhiqiang Liu 1 School of Mechanics and Engineering, China University of Mining and Technology, Xuzhou Jiangsu 2 China Huaye Group Company Limited, Beijing Email: 1073776631@ nd th rd Received: Jul. 2 , 2015; accepted: Jul. 16 , 2015; published: Jul. 23 , 2015 Copyright © 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract With the increasing speed of sinking headframe technology and construction, to increase the speed of gangue and use advanced equipment become inevitable, but the existing derrick can’t meet the demand; it is necessary to arrange the equipment reasonably. This article mainly takes the Sishan ling sinking headframe as an example in which the characteristics of sinking headframe lifting and suspension equipment layout are took into account fully based on the engineering background, and then the selection and structure of sinking headframe are optimized. After opti- mization, the sinking headframe can not only ensure the rod reasonable mechanical properties and equipment layout structure, but also effectively reduce the size of the structure member, so that the amount of steel structure can be reduced, and thus the goal of cost saving and considera-