船舶主机安全系统 SAM, Engine safety system.pdf

PCS Geamot 40 M Engine Safety System, ESS 40M Functions and Indications Chapter 2, Functions and Indications 2 Functions and Indications The ESS 40 M provides the functions - Slow Down - Shut Down and - Slow Down with subsequent Shut Down The inputs on the central module DZM 402 for the speed measurement via pick ups are fixed. Also the outputs for speed indication and emergency stop on over speed are fixed. The inputs on the IOM 402 modules are free configurateble for slow down and shut down via parameter (Pls. refer to the parameter table). On occurrence of a Slow Down or a Shut Down criterion, the particular function becomes active, taking the parameter setting for the input under account. On principle, optical and acoustic signals are output in case the engine safety system ESS responds. Operation and indication are effected via an operation and indication panel BAT410 on the bridge and in the ECR and, contrary to this, via illuminated pushbuttons and LED displays in the engine room. The optical alarms as well as system conditions are simultaneously displayed at all places of indication ( bridge, ECR, engine room ). The acoustic alarms are given only at the place of indication from which the ship is operated ( e.g. operation from the bridge ). This also applies to the acknowledgement of alarm signals as well as to control functions Override and Reset. When there are no system faults and alarms respectively available at the system, then the following view appears on th