测深仪GDF201 Graphic.pdf

SKIPPER GDF201 Graphic Depth Sounder Operation And Installation Manual Edition :sw: 2.12 Skipper Electronics A/S Telphone +47 23 30 22 70 Ryensvingen 5 Telefax +47 23 30 22 71 P.O.Box 151, Manglerud E-mail: skipper@skipper.no 0612 Oslo, Norway Co.reg.no: NO-965378847 -MVA www.skipper.no 1 CONTENTS 1. INTRODUCTION2 SYSTEM SUMMARY. 2 TRANSDUCERS. 2 MAIN UNIT 2 HAND CONTROLLER 2 Data Entry. 2 2 1. INTRODUCTION SYSTEM SUMMARY. GDF201 is a colour sounder with possibility for connection a TFT screen or a standard monitor. The display graphics is continuously shown on the screen along with complete fishery details. Printer/harddisk is available when a hard copy is required. Comprehensive interfaces are available including NMEA0183 input and output. TRANSDUCERS. GDF201 is prepared for connection of the following transducers: 38, 50 and 200 kHz. One or more of the transducers may be connected at the same time, and the desired transducer may be selected from the opera- tor panel. MAIN UNIT The main unit is normally mounted hidden. Power supply options are 220V AC or 24V DC. The power con- sumption is appx. 70 Watts at 110/220V AC or 50 Watts at 24V DC. HAND CONTROLLER The function of each soft-key button depends on the active screen, and the buttons are labelled on the lower rim of the screen. The display contrast may be adjusted by the user. The echo-gram is normally displayed continuously on the screen. Data Entry. Several screens may be selected to enter various settings and calibration parameters. Each screen has a selection of soft-key buttons. Screens 1 through 3 are primary op