无线收发芯片-规格书RFM119BW-RFM119CW规格书.pdf

W RFM119BW/RFM119CW Featurs  Embedded EEPROM  Very Easy Development with RFPDK  All Features Programmable  Frequency Range: 240 to 960 MHz  FSK, GFSK and OOK Modulation  Symbol Rate: 0.5 to 100 ksps (FSK/GFSK) 0.5 to 30 ksps (OOK)  Deviation: 1.0 to 200 kHz  Two-wire Interface for Registers Accessing and EEPROM Programming  Output Power: -10 to +13 dBm RFM119BW  Supply Voltage: 1.8 to 3.6 V  Sleep Current: 20 nA  FCC/ETSI Compliant  RoHS Compliant Module Size:15*14.5*2.2mm (RFM119BW) 16*16*2.2mm (RFM119CW) Descriptios The RFM119BW/RFM119CW is a high performance, highly flexible, low-cost, single-chip (G)FSK/OOK transmitter for various,240 to 960 MHz wireless applications. It is a part of the HOPERF NextGenRFTM family, which includes a complete line of transmitters, receivers and transceivers. The RFM119BW/RFM119CW provides the simplest way to control the data RFM119CW transmission. The transmission is started when an effective level turnover is detected on the DATA pin, while the transmission action will stop after the DATA pin Applications holding level low for a defined time window, or after a two-wire interface (TW I) command is issued. The chip  Low-Cost Consumer Electronics Applications features can be configured in two different ways: setting  Home and Building Automation the configuration registers through the TW I, or  Remote Fan Controllers programming the embedded  Infrared Transmitter Replacements RFPDK. The device operates from a supply voltage of 1.8