JTJ 03493公路路面基层施工技术规范（英文版）.doc

中华人民共和国行业标准 Industrial Standard of the Peoples Republic of China JTJ 034-93 公路路面基层施工技术规范 Technical Specifications for Construction of Highway Roadbases Compiled by: The Road Science Research Institute of the Ministry of Communications Approved by: Ministry of Communications of the People’s Republic of China Issue Date：1993-07-29 Implementation Date：1993-12-01 Issued by the Ministry of Communications of the People’s Republic of China People’s Communications Press  Notice on Issuance of the Trade Standard of the Communications Industry “Technical Specifications for Construction of Highway Roadbases” Jiao Gong Fa [1993] No. 761 This is to approve the issuance of the trade standard of the communications industry, the “Technical Specifications for Construction of Highway Roadbases” (Code number JTJ034-93), which is to be implemented as of December 1, 1993. The former “Technical Specifications for Construction of Highway Roadbases” issued by the Ministry of Communications in 1985 shall be annulled at the same time. The Road Science Research Institute of the Ministry of Communications shall be responsible for interpretation of this Code. We hope all users of this Code will pay attention to accumulating data information, summing up experience and notify by letter the Road Science Research Institute of any problems identified and comments on the correction for reference in future amendment. Ministry of Communications of the People’s Republic of China July 29, 1993 1 General 1.0.1 This Code is formulated with a view to meet the requirement of highway construction in our country, build the highway roadbases with quality in compliance with the requirement and prevent early destruction of the surface layer due to poor quality of the base layer. 1.0.2 The principal load bearing layer laid with high quality material, which is located directly under