三维复杂断层网建模方法及应用-北京大学学报自然科学版.pdfVIP

北京大学学报(自然科学版) 第 51 卷 第 1 期 2015 年 1 月 Acta Scientiarum Naturalium Universitatis Pekinensis, Vol. 51, No. 1 (Jan. 2015) doi: 10.13209/j.0479-8023.2014.173 三维复杂断层网建模方法及应用 † 李兆亮 潘懋 杨洋 曹凯 吴耕宇 北京大学地球与空间科学学院 , 造山带与地壳演化教育部重点实验室 , 北京 100871; † 通信作者 , E-mail: panmao@pku.edu.cn 摘要 针对复杂断层网 , 提出一种新的路径切割算法 , 能够处理各种复杂的断层相交情况 , 如 Y 型、λ 型、X 型、半 Y 型、半 λ 型等削截关系; 避免了 Pillar 方法和二叉树等传统方法的限制, 提高了断层建模的 灵活性和精确度。该方法提高了断面之间接触关系的半自动处理程度, 方便断层网的快速更新。通过实际模 型的验证, 解决了复杂断层网的快速构建问题, 提高了建模效率。 关键词 断层网; 接触关系 ; 路径切割 ; 二叉树 ; Pillar 方法 中图分类号 TP391 Research and Application of the Three-Dimensional Complex Fault Network Modeling † LI Zhaoliang, PAN Mao , YANG Yang, CAO Kai, WU Gengyu The Key Laboratory of Orogenic Belts and Crustal Evolution (MOE), School of Earth and Space Sciences, Peking University, Beijing 100871; † Corresponding author, E-mail: panmao@pku.edu.cn Abstract For complex fault network, a new path cut algorithm was proposed, by which all types of complicated fault intersection can be dealt with, such as Y, λ, X, half-Y, half-λ contact relations. This fault modeling method not only avoids the limitation of the Pillar method and binary tree method, but also greatly improves the flexibility and accuracy of fault modeling. The method improves semi-automatic processing of the contact relationship between faults and quick updating of fault models. Through the validation of practical model, the modeling of complex fault network