W2L500050 VRRP 教师参考.doc

  1. 1、本文档共18页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
W2L500050 VRRP 教师参考

VRRP 配置VRRP单备份组 搭建实验环境 首先,依照图示搭建实验环境,完成A、SWB、SWC、SWD的配置A的IP地址为1.168.0.1/24,网关为1.168.0.254/24;配置主机IP地址为10.0.0.1/24,网关为。[SWA]vlan 10 [SWA]int vlan 10 [SWA-Vlan-interface10] ip add 192.168.0.252 255.255.255.0 [SWA]vlan 100 [SWA-vlan100] port GigabitEthernet 1/0/1 [SWA]int vlan 100 [SWA-Vlan-interface100] ip add 192.168.255.1 255.255.255.252 [SWB]vlan 10 [SWB]int vlan 10 [SWB-Vlan-interface10] ip add 192.168.0.253 255.255.255.0 [SWB]vlan 101 [SWB-vlan101] port GigabitEthernet 1/0/1 [SWB]int vlan 101 [SWB-Vlan-interface101] ip add 192.168.255.5 255.255.255.252 [SWC]vlan 10 [SWC-vlan10] port GigabitEthernet 1/0/3 [SWD]vlan 100 [SWD-vlan100] port GigabitEthernet 1/0/1 [SWD]int vlan 100 [SWD-Vlan-interface100] ip add 192.168.255.2 255.255.255.252 [SWD]vlan 101 [SWD-vlan101] port GigabitEthernet 1/0/2 [SWD]int vlan 101 [SWD-Vlan-interface101] ip add 192.168.255.6 255.255.255.252 [SWD]vlan 102 [SWD-vlan102] port GigabitEthernet 1/0/3 [SWD]int vlan 102 [SWD-Vlan-interface102] ip add 10.0.0.254 255.255.255.0 完成trunk基本配置。在SWA、SWB、SWC上配置各自以太网端口GigabitEthernet1/0/1~GigabitEthernet1/0/2的链路类型为Trunk类型,允许VLAN10通过当前Trunk端口。请在下面的空格中补充完整的命令: [SWA]interface GigabitEthernet 1/0/2 [SWA-GigabitEthernet1/0/2] port link-type trunk [SWA-GigabitEthernet1/0/2] port trunk permit vlan 10 [SWB]interface GigabitEthernet 1/0/2 [SWB-GigabitEthernet1/0/2] port link-type trunk [SWB-GigabitEthernet1/0/2] port trunk permit vlan 10 [SWC]interface GigabitEthernet 1/0/1 [SWC-GigabitEthernet 1/0/1] port link-type trunk [SWC-GigabitEthernet 1/0/1] port trunk permit vlan 10 [SWC]interface GigabitEthernet 1/0/2 [SWC-GigabitEthernet 1/0/2] port link-type trunk [SWC-GigabitEthernet 1/0/2] port trunk permit vlan 10 完成路由基本配置。在SWA、SWB、SWD上配置RIP,让HostA、HostC所在网段能够互通。 [SWA]rip 1 [SWA-rip-1]version 2 [SWA-rip-1]undo summary [SWA-rip-1]network 192.168.0.0 [SWA-rip-1]network 192.168.255.0 [SWA-rip-1]silent-interface Vlan-interface 10 [SWB]rip 1 [SWB-rip-1]version 2 [SWB-rip-1]undo summary [SWB-rip-1]network 192.168.0.

文档评论(0)

ctuorn0371 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档