NACE_CODE 标准汇总.docVIP

NACE CIP LEVEL 1 REFERENCE MATERIALS: The following are excellent reference materials for anyone planning to take CIP Level 1. Students are not expected to purchase these materials. However, if you have access to any of these materials we encourage you to review them. NACE Standard RP0188 (latest revision), Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates NACE Standard RP0178 (latest revision), Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service NACE No. 1/SSPC-SP 5 (latest revision), White Metal Blast Cleaning NACE No. 2/SSPC-SP 10 (latest revision), Near-White Metal Blast Cleaning NACE No. 3/SSPC-SP 6 (latest revision), Commercial Blast Cleaning NACE No. 4/SSPC-SP 7 (latest revision), Brush-Off Blast Cleaning SSPC-VIS 1 (latest revision), Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning SSPC-VIS 3 (latest revision), Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning SSPC-PA 2 (latest revision), Measurement of Dry Coating Thickness with Magnetic Gages ISO 8504-2 (latest revision), Preparation of Steel Substrates Before Application of Paints and Related Products—Surface Preparation Methods—Part 2: Abrasive Blast Cleaning ASTM D 4417 (latest revision), Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel ASTM E 337 (latest revision), Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) ASTM D 4414 (latest revision), Standard Practice for Measurement of Wet Film Thickness by Notch Gages The Protective Coating Users Handbook, by Dr. Louis D. Vincent Generic Coating Types: An Introduction to Industrial Maintenance Coating Materials (Available from SSPC) NACE CIP LEVEL 2 REFERENCE MATERIALS: The following are excellent reference materials for anyone planning to