A320英文试题.docVIP

A320试题 What is the purpose of the pack? To regulate basic temperature What is the function of each pack controller? To control the corresponding pack and flow control valve What is the purpose of the zone controller? To control zone temperature How is the basic temperature regulated by the Zone Controller? By using the lowest zone temperature demand. What is the function of the trim air valve? To optimize the zone temperature by adding hot air What is the main purpose of the anti-ice valve? To stop ice formation across the pack condenser What is the purpose of the bypass valve? To modulate the pack discharge temperature What is the purpose of the RAM AIR flaps? To modulate the main airflow through the heat exchangers What flow is delivered by the pack with the PACK FLOW selector on LO and bleed air supplied by the APU? High What happens when the RAM AIR pushbutton is set to ON? The emergency rain air inlet flap opens. What is the number of outflow valves and safety valves? One outflow valve and two safety valves What happens when manual mode is used? The outflow valve can be manually controlled to adjust the cabin altitude. What is the purpose of the safety valves? To prevent excessive positive and negative differential pressure Where do you check the correct Manual landing elevation setting? On the ECAM CAB PRESS page. What happens if the MODE SELECTOR is set to MAN and the DITCHINET pushbutton is set on? Only the outflow valve is not automatically controlled to close. Where does the LAV and GALLEYS ventilation air come from? From cabin distribution ducts What is the purpose of the Avionics Equipment Ventilation Computer? To ensure control and monitoring of the avionics ventilation system What is the purpose of the avionics ventilation system in the avionics bay? To ventilate the avionics equipment How is the fwd cargo compartment ventilated? With cabin ambient air What are the basic functions of the FACs? Rudder control and flight envelope protection Where are t