7.4 B04 - 钢结构-Steelwork.docx

7.4 B04 - Steelworks钢结构PART 1 - GENERAL第一节一般规定1.1 SCOPE OF WORKS工作范围All the structural steel members including steel columns, steel beams, crane girders, crane rails, secondary steel structure for utilities, platforms for installation engineering, catwalks,maintenance platforms, bracings, purlines, Steel Stair, Steel canopy ,metal decking andgratings to support the floors, the member connections including high strength bolting and the shop welding. Shop priming; site fire-resisting （antiseptic, Anti-rust） paint, Surface coating.钢结构工程，包括所有支承楼层的钢柱，钢梁,吊车梁,吊车轨道，次结构，安装平台，人行道，维修平台，支撑，檩条，钢楼梯, 钢雨棚，金属楼承板和钢格栅板等楼板系统，钢结构构件的连接(工厂焊接和螺栓连接)。工厂喷涂底漆，现场喷涂防火（腐、锈）涂料，面漆。1.2 SUBMITTALS提交1.2.1The Contractor must submit the following documents at the first step :承包商必须估算并提供以下文档：1) Specialist Contractor’s Competency with project reference and the OrganizationChart承包商有工程证明和组织计划的资质。2) Quality Control Procedure of the Specialist Contractor;钢结构专业承包商质量控制措施3) Arrangement of the works and Site Establishment Plan工作安排及现场工地布置图4) preliminaries documents (including the equipments and machines)准备工作（包括设备和机器）的文档1.2.2 Secondary step： 其次1) Shop drawings and associated connection design.加工图及构件连接计算。2) Mill test reports for all Q235Q345 structural steel.结构用Q235Q345钢的工厂测试报告。3) Mill test reports for high-strength bolts and accompanying nuts and washers.高强螺栓，螺帽和垫圈的测试报告。4) A copy of all welders’ certifications.焊工证的复印件。5) The relevant safety regulations .相关的安全条例6) Inspection reports concerning steel structural, welding and high-strength bolt tightening during installation.在工程施工中,所有与结构，焊缝，高强螺栓相关的报告。7) Method statement for fabrication, erection and installation of the steelworks including inspection and testing.钢结构施工方案包括工厂组装，现场起吊、安装及有关验收及测试方案。1.3 QUALITY ASSURANCE质量保证1.3.1The construction must be in accordance with the relevant current standards, guidelines and the rulings of the relevant authorities.结构体系必须符合国家现行的相关标准，指导意见以及有关部门的规定，1.3.2In particular the following recognized standards