2200超级终端的命令详解.doc

一.IP命令 restartcard restart wan card 复位WAN卡 cfgport Config the port of ip card 配置IP卡端口 trunk Enable or disable the trunking function打开/关闭中继功能 showport Show the status of two card显示状态 countcard Config the port of ip card统计IP卡端口 showvlan show vlan configure information显示vlan配置信息 createvlan create a vlan创建一个vlan addtovlan add port to vlan 从端口加一个VLAN delfromvlan delete port from vlan从端口删除一个VLAN delvlan delete a vlan删除一个VLAN cfgvlantag configure a vlans tag设置一个VLAN标记 usrcomm enable or disable user communication打开/关闭通信服务 showportinfo show port information about vlan显示VLAN信息 cfgpvid configure port PVID配置端口的PVID cfgvlanstatus active or inactive a vlan激活一个VLAN defaultvlan auto set default vlan自动设置一个认的VLAN delallvlan delete all vlans删除所有的VLAN ipbound add ip bound address to port 给端口绑定一个IP地址(最多6个) ipdebound delete ip bound address from port给端口删除一个IP地址 enablebound enable or disable port ip bound function打开或关闭端口的IP功能 showbound show ip bound address of port 显示端口的IP地址 showmac show mac address and ip address of port显示端口的MAC地址 setmac set mac address limit of port设置MAC地址限制的端口 showmaccfg show mac address limit of port显示MAC地址限制的端口 r Repeat the last command sethostip 设置能够telete访问的IP包的优先级,在广播风爆发生时,此IP有优先处理级 二.core command CReateVC Create one user VC 创建一个VC DeleteVC Delete one user VC 删除一个VC ShowVC Display config status of a user VCs 显示VC的配置和状态 ShowAllVC Display config status of all user VCs显示所有VC的配置和状态 CountVC Display cell count of a user VCs显示VC使用的信元计数 CountAllVC Display cell count of all active user VCs显示所有的VC使用的信元计数 CountPort Display cell counts of a Line/Wan port显示线卡/WAN卡信元计数 CountAllPort Display cell counts of all active Line/Wan port显示所有的线卡/WAN卡信元计数 QosUpdate Update Qos parameter of a user VCs修改模板 ShowCard Display status of c