绕线机英文说明书.doc

This series controller characteristics Microcomputer control system, the operation is easy, humanization, intelligent, fully functional.But also according to customers unique features of the proposed change, to meet customer demand. Controller can be stored 40 dont product (material), single shaft type 10 section (step) of each product data, biaxial models each product 5 period of winding data (step), can also according to customer requirements to extension. This series controller with inverter, ac motor, brushless dc motor, brushless dc motor with types of semi-automatic, automatic winding machine (CNC) controller. High quality machine please placed in ventilated good place, is conducive to work long hours cooling machine. Please check prior to power supply voltage, be sure to pick up good ground, prevent to get an electric shock. Are strictly prohibited in the corrosive gas, wet space is engaged in the coiling machine operation, lest cause circuit failure, damage to the machine.  Prohibit any object fall into the machine, easy to cause short circuit. Any part of the maintenance, can only be conducted by professional maintenance personnel.The controller panel instruction: 0-9.: ten keys to input values to use, the key of the second function is as follows:1: in the standby state, press the output minus 12: in standby state, press this button for two seconds production automatic reset3: in standby state, press this button to brake and loosen the switch4: in standby and operating condition can click this button to achieve growth5: in standby and operating condition can click this button to achieve deceleration6: in standby and press this button yield under the running condition and rotational speed switching7: in standby state or pause, press this button force into the next order8: when in standby state or pause, press this button turn of the last step in the sequence9: in the standby mode by pressing this button shows the PO, at this