运算放大器：带宽4运算放大器：带宽4.pdfVIP

Bandwidth – 4 带宽-4 TIPL 1214 TI Precision Labs – Op Amps Presented by Jason Wu Prepared by Art Kay, Pete Semig, and Tim Green  Hello, and welcome to the TI Precision Lab discussing op amp bandwidth, part 4.  In this video we’ll cover 5 bandwidth related topics:  First, a deeper look at how the slope of the Aol curve affects gain bandwidth  Second, How an op amps input capacitance can limit the bandwidth.  Third, How to calculate the practical gain verses frequency for amplifier circuits  Fourth, How to limit the bandwidth of a circuit on purpose using a feedback capacitor  And finally How slew rate can affect the response over frequency.  哈啰, 欢迎来到TI Precision Labs (德州仪器高精度实验室). 本次视频将介绍 运算放大器的bandwidth(带宽) 第四部分.  我们将讨论5 个带宽相关的主题。  第一, 深入探讨Aol curve 的斜率如何影响增益带宽  第二, 为何运算放大器的input 电容能限制带宽  第三, 如何计算放大器电路的实际增益与带宽  第四, 如何运用feedback capacitor 来限制电路的带宽  第五, 了解slew rate 如何影响不同带宽的响应 Gain Bandwidth Changes PARAMETER CONDITIONS MIN TYP MAX UNIT Gain Bandwidth Product GBW Gain = +1 18 MHz OPA209 2 2  At this point we have discussed the gain bandwidth product in great detail. We know that it is only valid where the slope of the Aol curve is -20dB/decade. Unfortunately, sometimes it is not obvious whether the gain bandwidth product is valid or not.  Here we have the gain bandwidth product specification from the OPA209 data sheet. The typical gain bandwidth product is listed as 18MHz given that the gain is 1V/V. But, what about other closed loop gains?  Here we have the open loop gain and phase curves versus frequency