hypermesh笔记原创.doc

? F1 -- Hidden Line 隐藏线? F2 -- Delete 删除（删除任何对象都用此命令）? F3 -- Replace 合并两个节点? F4 -- Distance 测量距离角度等? F5 -- Mask 隐藏 ? F6 -- Element Edit 单元编辑（创建，合并，分割单元等）? F7 -- Align Node 节点共线排列? F8 -- Create Node 创建节点? F9 -- Line Edit 线编辑（非边界编辑 ）? F10 -- Check Elem 单元质量检查? F11 -- Quick Edit 快速几何编辑? F12 -- Automesh ?自动网格划分 Shift+F1-F12, Ctrl+F1-F6 Opening and Saving Files - HM-1010 bumper_cen_mid1.hm 1. Access the Import tab in one of the following ways: ? From the Menu Bar, choose File, then Import ? From the standard toolbar, click Import () （这里的Import ()是在已有模型上加另一个模型） Importing and Repairing CAD - HM-2000 Importing and Repairing CAD - HM-2000 2. Go to the autocleanup panel. 查看拓扑情况,自动清理,可以删一些重复面,距离较小的自由边,修补结点问题 Step 3: ?Delete the surface that overhangs the round corner.(删重复面) From the Geometry menu, point to Delete and click Surfaces 或Press F2(和点叉一样) Step 4: ?Create surfaces to fill large gaps in the model surfaces panel keep tangency(可以平滑过渡) Verify the auto create (free edges) check box is selected Step 5: ?Set the global geometry cleanup tolerance to .01.(设置全局清理容差,这样其他地方的容差都是0.01) Press O to go to the options panel Go to the geometry sub-panel In the cleanup tol = field, type 0.01 to stitch the surfaces with a gap less than 0.01. Step 8: ?Combine the remaining free edge pair using replace. Go to the replace sub-panel(quick edit是交换点，这里交换边，效果差不多) Step 9: ?Find and delete all duplicate surfaces. Access the Defeature panel Simplifying Geometry - HM-2020 Step 4 (Optional): ?Review the quality of the mesh. Tool page, then select check elems（可以按要求检查，但不能编辑） 3. In the length field, type 1. 4. Click length to evaluate the minimum length. Many of the elements failing the length test are located around the fillets of this model Step 6: ?Remove all surface fillets in the clip. 1. Go to the defeature panel. In the min radius field, type 2.0. Refining Topology to Achieve a Quality Mesh -HM-2030 Step 3: ?Review the mesh quality. 4. In the length field, ty