互通“有无”——“有”与“无”的关系在产品设计中的运用研究each other .pdfVIP

摘要 摘 要 设计师们永远不会停止对设计方法的探讨与尝试，提取传统思想运用到产品设计中的入手点是自由 的，总结出的手法也是不计其数的，在当下没有一种设计可以用对与错来评价，但所带来的设计意义和 价值指引着设计师们的思考。 本文通过中国传统一组特殊而又被人熟知的“有”与“无”的关系，基于其视角观察当下流行的产 品设计，通过对大量设计案例的分析、总结、提取出其中蕴含的“有“与”无”关系，在结果中探讨“有 无”关系在当下产品设计中运用的新途径，提取可行的设计手法与关系，并进一步思考讨论这组关系在 当下设计中的运用与延续，满足人们对设计的复杂需求。 关键词： “有“与”无”的关系，当下设计，产品设计，新途径 万方数据 Abstract Abstract Designers will not stop exploring and trying for the design method s. It is flexible that the starting point which extracts from the traditional thoughts makes into the product designs and the methods that are summarized is countless. There has not such a design that can be evaluated with right or wrong. But the significance and value it brings inspire the thoughts of the designers. With the relationship between repletion and emptiness which are special and known by people from the traditional Chinese, based on its perspectives to observe the present prevailing product des igns, extracting and summarizing and extracting from repletion and emptiness from a lot of designs, discussing the new ways of usages of the present product designs, extracting the available design methods and relationship and then making a further step in discussing the usages and continuation of the relationship in the present designs to meet the complex needs of people. Key Word：the relationship between repletion and emptiness;present design;product design;new ways I 万方数据 目录