电动打磨机说明书翻译.docx

一、包装盒manicure pedicure修指甲和修脚variable speed可变速度rotary detail carver旋转雕刻细节multi-usa:多用途carving雕engraving雕刻routing路由grinding磨削sharpening锐化sanding打磨polishing抛光drilling钻孔and more和更多的10v adapter10V适配器variable speed from 3000~20000RPM可变速度从3000 ~ 20000转速/分double bearings design双轴承设计double insulated双重绝缘easy to use in any position容易使用在任何位置accepts all rotary tool accessories接受所有旋转工具配件lightweight design for precision operation精密操作的轻量化设计collet type:套筒式：spring chuck type:弹簧卡簧式：二、说明书mini polish nail machine微型抛光钉机specification：规范：power single phase,50-60hz,double lnsulated功率单相，50-60赫兹，双重绝缘rpmsingte speed:20000 variable speed:3000~20000 转单一速度：20000 变速：3000~20000colletcollet type:2.4or3.2mm spring chuck type:0.3~3.2mm夹头套筒式:2.4或3.2mm 弹簧夹头的类型:0.3~3.2mmdimensions 160mmL×24mm Diameter尺寸 160mm长×24mm 直径safety rules：安全规则：1、always unplug the tool when you change accessory or collet.1、总是拔出工具当你更换配件或夹头。2、do not engage the shaft lock button while the tool is running.2、工具正在运行时，不要在轴上锁定按钮。3、do not use the machine near water or place it in water.if motor falls into water, unplug it immediately and do not touch the water.3、不要使用机器附近的水或地方它在水里。如果电机落入水中，立即拔下，不要碰水。4、do not touch the bit or collet after using it because the bit and collet are too hot to be touched by bare hands.4、使用后，不要用手触摸砖头夹，因为太热。5、keep dust out of you eyes and lungs by using a protective eye wear or a dust mask.5、用一种防护性的眼睛戴上或一个防尘罩，防止眼睛和肺部的灰尘。6、alwaysunplugitafter using the machine.6、使用机器后，总是“拔下它”。7、when not used,tool m ust be stored in a dry place and kept beyond the resch of children.7、当不使用时，工具必须存放在干燥的地方保存并在孩子碰不到的地方。operation:操作:1、this tool is design for carver,engrave,rout,grind,sharpen,sand,polish,drill and more.1、这个工具是设计用于雕刻，雕刻，击溃，研磨，锐化，砂、抛光、钻孔和更多。2、unplug the tool form electrical outlet before loading a bit.2、在装载钻头前将刀具形状的电插座拔下。3、press shaft lock button.use the collet wrench to loosen the colletnut.inset the bit(not included),and tighten the colletsecurely.but avoid excess