培训检验英文.doc

.培训检验人员，优化来料和最终检验规范 1、Criteria on training the inspectors, optimizing the incoming material and final inspection 2.加强过程控制，优化巡检检验规范 2、Criteria on strengthening the process control and optimizing the patrol inspection 3.对出现的重缺陷同相关部门一同进行判定和分析，提出改进建议 3、Determination and analysis of the occurred major defects together with the relevant departments and put forward the improving suggestions 4.误检批数（批量性问题）≤1批每年 4、Lot number of misdetection(batch quantity problem) shall be less than one percent per year 5.使长线产品的合格率波动在±2%范围内 5、Control the up-to-standard rate of oversupplied products to fluctuate within two percentage 6.通过预防措施使得相同缺陷不再出现 6、Avoid the reoccurrence of the similar defects by means of preventive measures 有些是专业质检词汇，如final inspection,criteria,reoccurrence,defects,preventive measures etc，请多积累，祝你进步！Annealing providers of audit, monitoring and implementation of martial law, the requirement to provide each of the annealing temperature records 2. Revised and updated control scheme and PFMEA, the magnifying glass on the end-an increase of 100% appearance Head seized, and take effective measures to reduce the risk of failure 3. Annealing incoming parts to increase the hardness of sampling, and avoid the occurrence of such defects 4. Amendment cutting operating instructions clearly defined raw materials Touwei Bar 0.3 meters may be made to remove the processing sequence 5. Electroplating requirements for appearance of defects provider immediately curing process parameters and to amend the relevant documents strictly control 6. Ministry of quality providers re-plating process to review and monitor the whole process document the effectiveness of the implementation 7. Process to amend the relevant documents, car Cylindrical roughness clearly defined process for the strict control of 160 plus Part II 1. Annealing to the quality of the vendor review process, each accompanied annealing temperature curve after a follow-up records storage processing 2. Revised,