【精选】8脚低功耗人体红外感应IC芯片PIR00018脚低功耗人体红外感应IC芯片PIR0001.pdf

深圳市普恩科技有限公司 SHENZHEN SALENS TECHNOLOGY LIMITED PIR0001 PIR Controller IC for LED Lamp Specification GENERAL DESCRIPTION The PIR0001 IC is a CMOS chip designed to PIR controller IC for DC LED lamp . It can use PHOTO transistor or CDS application. The chip built-in regulator provides stable power. The chip is equipped with amplifiers, comparator, timer, control circuits, system oscillator, and output timing oscillator. Its PIR sensor detects infrared power variation induced by the motion of a human body and transforms it to a voltage variation. If PIR output voltage variation conforms to the criteria, then the lamp LED is turned on with an adjustable duration. FEATURES Operating voltage 3.6V~5.5V, Built-in regulator 3.0V Built-in 16Khz oscillator for system clock. Operating current @VBAT=4.5V, no load standby current 20uA Provides PHOTO or CDS sensor detect environment Day_time or Night_time. Provide turn on delay timer fix 16 sec. After power-on have about 1sec stable-time and 16sec warm-up time. When lamp turn on change to turn off, then disable PIR 1sec APPLICATION Wide consumer products BLOCK DIAGRAM OP1N OP1P PIR Sensor OP1O PIR Sensor OUT circuit detecting circuit Output mode driver PHI Enviro