饮水机的单片机控制程序.docVIP

饮水机的单片机控制程序 #include AT89X51.h #include intrins.h #define dataport P0 #define uchar unsigned char #define uint unsigned int uchar code text[]={温度测控仪器 设定温度： 现场温度： 设备状态：}; uchar code text1[]={加热}; uchar code text2[]={保温}; uchar code text3[]={停止}; unsigned char tempL=0; unsigned char tempH=0; uchar tL,tH,tempD; uchar tempS; bit BZ=0; sbit lampR=P1^0; sbit lampG=P1^1; sbit LCD_RS=P2^0; sbit LCD_RW=P2^1; sbit LCD_EN=P2^2; sbit DQ=P2^7; //LCD驱动子函数 void WaitForEnable(void) { DataPort=0xff; LCD_RS=0;LCD_RW=1;_nop_(); LCD_EN=1;_nop_();_nop_(); while(DataPort0x80); LCD_EN=0;} void WriteCommandLCD(uchar CMD,uchar Attribc) { if(Attribc)WaitForEnable(); LCD_RS=0;LCD_RW=0;_nop_(); DataPort=CMD;_nop_(); LCD_EN=1;_nop_();_nop_();LCD_EN=0; } void WriteDataLCD(uchar dataW) { WaitForEnable(); LCD_RS=1;LCD_RW=0;_nop_(); DataPort=dataW;_nop_(); LCD_EN=1;_nop_();_nop_();LCD_EN=0; } void InitLCD(void) { WriteCommandLCD(0x30,1); WriteCommandLCD(0x08,1); WriteCommandLCD(0x01,1); WriteCommandLCD(0x06,1); WriteCommandLCD(0x0c,1); } void delay_ms(uint k) {uint i,j; for(i=0;ik;i++) {for(j=0;j121;j++);} } //18B20驱动 void delay(uint time) { uint n; n=0; while(ntime) n++; return; } void init_18b20(void) { uchar x=0; DQ=1; delay(8); DQ=0; delay(85); DQ=1; delay(14); x=DQ; delay(20); } uchar ReadOneChar(void) { unsigned char i=0; unsigned char dat=0; for(i=8;i0;i--) { DQ=1; delay(1); DQ=0; dat=1; DQ=1; if(DQ) dat|=0x80; delay(4); } return dat; } void WriteOneChar(uchar dat) { uchar i=0; for(i=8;i0;i--) { DQ=0; DQ=dat0x01; delay(5); DQ=1; dat=1; } delay(4); } void Readtemperature(void) { init_18b20(); WriteOneChar(0xcc); WriteOneChar(0x44); delay(125); init_18b20(); WriteOneChar(0xcc); WriteOneChar(0xbe); tempL=ReadOneChar(); tempH=ReadOneChar(); tL=tempL; tL=tL4; tH=tempH; tH=tH4; tempD=tH+tL; tempL=tempL0x0f; // tempF=tempL*625; } //字符串显示子函数 void dis_text(void