低温重复率ybyag固体激光放大器-红外与激光工程.pdfVIP

第42 卷第5 期 红外与激光工程 2013 年5 月 Vol.42 No.5 Infrared and Laser Engineering May 2013 低温重复率Yb:YAG 固体激光放大器 李 磊，王建磊，程小劲，刘 晶，施翔春，陈卫标 ( 中国科学院上海光学精密机械研究所，上海 201800) 摘 要 Yb :YAG 晶体比Nd :YAG 晶体更适用于产生和放大具有 Hz 量级重复频率的高脉冲能量 。整个系统由再生种子 、 激光。报道了LD 泵浦低温工作的Yb :YAG 脉冲固体激光放大系统 源 预放 大器和主放大器3 部分组成。晶体用铟和金箔作为导热层压到金属热沉上，散热方式采用传导冷却， 低温环境由液氮冷却热沉来保证。实验结果表明：当晶体温度控制在 150 K 时，装置得到了3 J@ 10 ns, 10 Hz 的1 030 nm 脉冲激光能量输出。研究了低温真空环境下介质膜的损伤等因素对泵浦参数的要 求，最后分析了进一步提升脉冲能量所需要解决的问题。 关键词 激光放大器； Yb:YAG ； 脉冲能量； 低温 中图分类号 TN248 文献标志码 A 文章编号 1007-2276(2013) 05-1170-04 Cryogenic Yb:YAG solid state pulsed laser amplifier Li Lei, Wang Jianlei, Cheng Xiaoj in, Liu Jing, Shi Xiangchun, Chen Weibiao (Shanghai Institute of Optics and Fine Mechanics , Chinese Academy of Sciences , Shanghai 201800 , China) Abstract: Compared with Nd :YAG, the Yb:YAG laser system is more suitable to produce at several Hz repetition rates high pulsed energy laser beam. A LD pumped Yb:YAG solid state pulsed MOPA laser system at cryogenic temperature was reported. The amplifier chain was composed of three parts: regenerative amplifier seed, pre amplifier and main amplifier. The thermal management was realized by liquid nitrogen cooling sink on which laser crystal was compressed using indium and gold foil as thermal interface . The coating film damage at cryogenic and vacuum environment was studied , which directly affected the pumped and extracted parameter design . A 1 030 nm pulse 10 Hz , 10 ns laser output energy