MATLAB-心.docxVIP

?? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?基于MATLAB的华丽心形动画~~~某日不务正业，借用了MATLAB里的绘图功能，为某人制作了个小动画，嘿嘿，试试就知道（需安装MATLAB）。这里截几个小图，实际背景是粉色的，而且会动哦~?当然，懂MATLAB的童鞋可以随意修改背景，大小，形状，时间，动画，重力加速度，字幕，字体等等，不用我教了吧~?这里用到了一个心脏线的参数方程和别人的若干代码。另外，此代码完全开源，各位看官可随意复制粘贴?以下是源代码，复制到MATLAB的函数编辑器里，保存，然后按F5即可：?function demoDisplayclearclc?close all;?[x,y,z] = heart;bottomZ = min(z(:));radius = abs(bottomZ);????axis vis3daxis offdaspect([1.6, 1, 1.875]);hold on;markerColor = [0.5, 0.5, 0.5];lineColor = [0.7, 0.7, 0.7];?figWidth = 800figHeight = 600;screenSize = get(0, ScreenSize);X0 = (screenSize(3)-figWidth)/2;Y0 = (screenSize(4)-figHeight)/2;set(gcf, Position, [X0,Y0, figWidth, figHeight]);?camtarget([0, 0, 0]);set(gcf,Renderer,zbuffer);set(gcf,DoubleBuffer,on);% RGB(255 105 180) is for pink colorset(gcf, color, [255 105 180]/255);??startAZ = 30;satrtEL = 20;view(startAZ, satrtEL);??% draw pointsfor iLoop = 1:size(x, 1)??? plot3(x(iLoop, :), y(iLoop,:), z(iLoop, :), Marker, ., MarkerEdgeColor, markerColor, LineStyle, none);??? pause(0.2);end????% draw wire framesfor iLoop = 1:size(x, 1)??? plot3(x(iLoop, :), y(iLoop,:), z(iLoop, :), color, lineColor, LineStyle, -);??? pause(0.1);??end?for iLoop = 1:size(x, 2)??? plot3(x(:, iLoop), y(:, iLoop), z(:, iLoop), color, lineColor, LineStyle, -);??? pause(0.1);?end?% rotate wire framefor i=1:36??? camorbit(10,0,data);??? pause(0.1);??end% clean the curent axesdelete(get(gca, Children));?camlight left;newLineColor = [0.7, 0.4, 0.4];?% re-draw the whole heart with surf functionh = surf(x,y,z, EdgeColor, newLineColor, FaceColor, r);for i=1:36??? camorbit(10,0,data);??? pause(0.1);end?mediumColor = [0.8, 0.3, 0.3];set(h, EdgeColor, mediumColor,FaceLighting,gouraud);for i=1:36?????? camorbit(10,0,data);??? drawnow;endset(h, EdgeColor, none);drawnow;?% define the Z-path for heart re-shapedeltaZ = linspace(-.3, 0, 5);deltaZ = [fliplr(deltaZ), deltaZ];deltaZ = repmat(deltaZ, 1, 3);zlim(manual);for iLoop = 1:length(deltaZ)?????? % draw the bouncing heart??? curDeltaZ = de