NOKIA RNP试题库7(QA).docVIP

Section I: General GSM Theory (Answer the question by selecting the correct answer. If applicable, more than one answer can be selected) A cell is equipped with 4 TRXs. Which of the following timeslot allocations is most sensible? 1 BCCH, 3 SDCCHs, 28 TCHs 1 BCCH/SDCCH, 3 TCHs 1 BCCH, 3 SDCCHs, 36 TCHs a) is the correct answer One cell has 2 TRXs (14 timeslots used for TCH). How many Erlang can this cell carry if the QoS (blocking rate) is 2%? a) 2.7 Erlang b) 8.2 Erlang c) 16.0 Erlang b) is the correct answer If the Mobile Station is using ARFCN=36, which frequency is it transmitting on? 455.2 MHz 734.2 MHz 897.2 MHz 1837.2 MHz c) is the correct answer What is the duplex distance in GSM900 (distance between Transmit and Receive frequencies)? 45 kHz 30 MHz 45 MHz 90 MHz c) is the correct answer Which of the following parameters have an impact of the handsets power consumption in Idle Mode? call_reestabl_allowed (Call Re-Establishment Allowed) radio_link_timeout dtx_mode no_of_m_frames_between_paging (Number of Multiframes between Paging Groups) timer_periodic_update_ms dr_in_use (Directed Retry in Use) d) and e) are the correct answers Which of the following situations can cause SDCCH congestion in a cell? Bad BSIC/Frequency planning Proximity to LA border Downlink Interference a), b) and c) are the correct answers On which logical channels can a Handover Command be sent from the BTS to the MS? SDCCH SACCH FACCH SCH BCCH TCH CBCH and c) are the correct answers Which of the following settings of the trigger RX Quality trigger levels (Uplink) in the Handover Power Control algorithms is most reasonable? ho_t_q_ul_rx_qual = 4 pc_l_t_qual_ul_rx_qual = 4 ho_t_q_ul_rx_qual = 4 pc_l_t_qual_ul_rx_qual = 3 ho_t_q_ul_rx_qual = 3 pc_l_t_qual_ul_rx_qual = 4 is the correct answer What is the maximum distance between a MS and a BTS (in dedicated mode, without the extended cell option)? 12 km 18 km 35 km 63 km 88 km is the correct answer On which logical channels can a SMS be tr