桩基础设计任务书桩基础设计任务书.pdf

本科生课程设计 课 程 基础工程课程设计 题目 ：柱下钢筋混凝土预制桩基础设计 学 院 建筑工程学院 年级、专业 2011 级土木工程 学 号 2011450081 姓 名 宗振宇 指 导 教师 张建辉 年 月 日 1 目 录 一、工程地质资······································3 二、桩基础设计资料··································3 三、确定持力层，桩型，承台，埋深 ····················4 四、确定单桩承载力（根据规范的经验公式）·············4 4.1 按桩周岩土的阻力确定单桩竖向承载力·······················4 4.2 按材料强度确定单桩竖向承载力····························4 五、桩身结构验算 ····································5 六、确定桩数和承台尺寸 ······························5 七、群桩承载力计算 ··································6 7.1 桩顶作用效应验算 ·········································6 7.1 桩顶作用效应验算 ·········································6 7.3 软弱下卧土层承载力验算···································7 八、群桩沉降计算 ····································7 九、承台设计计算 ····································9 9.1 柱边冲切验算 ·············································9 9.2.角桩向上冲切验算········································10 9.3 承台受剪且承载力验算 ····································10 9.4 承台受弯承载力验算 ······································10 9.5.局部受压验算············································11 十、参考文献 ········································11 2 一、工程地质资料 建筑场地土层按其成因、土性特征和物理力学性质的不同，自上而下划分为4 层， 物理力学性质指标见表 1-1，勘察期间测得地下水混合水位埋深为2.0m。地下水水质 分析结果表明，本场地地下水无腐蚀性。 直剪试验 土 含 天然 孔 塑 (直快) 压缩 承载力 厚 性 液性 层 水 重度 隙 Ps 粘聚 模量 标准值 名称 度 3 指 指数 内摩 编 量w (kn/m 比 mpa E f (kpa