CADCAM英文版期末复习资料.docx

一. What is CAD, CAPP, CAM and CIMS, and briefly describe the relationship between them.1.CAD: computer-aided design ,it mainly refers to the use of the computer to complete the entire process of product design generally including CAD design and analysis of two aspects.2, CAPP: Computer Aided Process Planning, it refers to the use of computer technology to complete process planning of part machining.3.CAM: computer-aided manufacturing, it refers to the use of computers and numerical control equipment (such as CNC machine tools, machining centers, etc.) to manufacture parts.4.CAD / CAM: computer-aided design and computer-aided manufacturing referred to using the computer as the primary means to generate and use a variety of digital information and graphical information for the design and manufacture of the product.5.The relationship between CAD, CAPP, CAM: Generally speaking, CAD / CAM CAD / CAPP / CAM of. Referred to that contained in the CAD / CAM systems have CAPP. CAD system to produce parts (including geometric information and process manufacturing information, such as tolerance requirements, surface roughness, etc.). CAPP system to accept information from CAD, and the use of reasonable design, process design knowledge processing, optimized processing parameters and processing equipment. CAM CAD / CAPP / CAM system to accept the part information from the CAD and CAPP process planning and process parameters, after the processing of the CAM system to generate NC code, incoming numerical control equipment control equipment automatically processed6.CAD / CAM technology trends: integrated, intelligent, standardization, network-based, three-dimensional二：CADCAM1: Fill in the blanks (the big issue 20 small problem, every empty 1.5 points, a total of 30 points)(1) FMS is the abbreviation of Flexible Manufacturing System.(2) APT is an automatic programming tool (Automatically Programmed Tool) .(3) CAM is the abbreviation of computer aided manufacturing.(4) IMS is an abbre