GPRS Qos参数对PDP激活和传输速率的影响的报告.doc

关于GPRS Qos参数对PDP激活和传输速率的影响的测试报告 测试目的 检验HLR中的五项GPRS Qos参数取值对PDP激活和传输速率的影响 测试环境 Aircard上网卡和GX100双模卡；FTP Sever：；测试文件大小：100K 关于GPRS Qos参数的各项取值的含义 Qos参数一共五项： delay class: GSM 02.60 defines four delay classes (1 to 4). The network operator should provision adequate transmission resources on the radio and network communication channels in order to support the expected number of subscribers within each cell at a given delay class. A PLMN may support only a subset of the delay classes. As a minimum, the PLMN shall support the best effort delay class (4). reliability class: The reliability class specifies the requirements of the various network protocol layers. peak throughput class: The peak throughput is measured at the Gi and R reference points in units of octets per second. It specifies the maximum rate at which data is expected to be transferred across the network for an individual PDP context. There is no guarantee that this peak rate can be achieved or sustained for any time period, this depends upon the MS capability and available radio resources. The network may limit the subscriber to the negotiated peak data rate, even if additional transmission capacity is available. The peak throughput is independent of the delay class, that determines the per-packet GPRS network transit delay. mean throughput class: The mean throughput is measured at the Gi and R reference points in units of octets per hour. It specifies the average rate at which data is expected to be transferred across the GPRS network during the remaining lifetime of an activated PDP context. The network may limit the subscriber to the negotiated mean data rate (e.g., for flat-rate charging), even if additional transmission capacity is available. A best effort mean throughput class may be negotiated, and means that throughput shall be made available to the MS on a per need and availability basis. precedence class: The service precedence indicates the relative importance of maintaining the se