ROS通用脚本命令精典大放送.docVIP

ROS通用脚本命令精典大放送-脚本使用方法 ROUTEROS常用命令/sy reset?????????????????????????????? 恢复路由原始状态/sy reboot???????????????????????????????? 重启路由/sy showdown?????????????????????????????? 关机/sy ide set name=机器名?????? 设置机器名 /export?????????????????????????????????? 查看配置 /ip export?????????????????????????????? 查看IP配置/sy backup 回车save name=你要设置文件名?????????????????? 备份路由LOAD NAME=你要设置文件名?????????????????? 恢复备份/interface print?????????????????????????? 查看网卡状态0 X ether1 ether 1500 这个是网卡没有开启0 R ether1 ether 1500 这个是正常状态/int?? en 0???????????????????????????????? 激活0网卡/int?? di 0???????????????????????????????? 禁掉0网卡/ip fir con print???????????????????????? 查看当前所有网络边接/ip service set www port=81?????????????? 改变www服务端口为81/ip hotspot user add name=user1 password=1?? 增加用户一：限速脚本 :for wbsz from 1 to 254 do={/queue simple add name=(wbsz . $wbsz) dst-address=(192.168.0. . $wbsz) limit-at=1024K/1024K max-limit=1024K/1024K}二：限制每台机最大线程数 :for wbsz from 1 to 254 do={/ip firewall filter add chain=forward src-address=(192.168.0. . $wbsz) protocol=tcp connection-limit=50,32 action=drop}三：端口映射 ip firewall nat add chain=dstnat dst-address=(34) protocol=tcp dst-port=80 to-addresses=() to-ports=80 action=dst-nat四：封端口号/ ip firewall filter ad ch forward pr tcp dst-po 8000 act drop comment=Blockade QQ五：更变telnet服务端口 /ip service set telnet port=23六：更变SSH管理服务端口 /ip service set ssh port=22七：更变www服务端口号 /ip service set www port=80八：更变FTP服务端口号 /ip service set ftp port=21九：增加本ROS管理用户 /user add name=wbsz password=admin group=full十：删除限速脚本 :for wbsz from 1 to 254 do={/queue simple remove (wbsz . $wbsz) }十一：封IP脚步本 / ip firewall filter add chain=forward dst-address=8/32 action=drop comment=Blockade QQ十二：禁P2P脚本 / ip firewall filter add chain=forward src-address=/24 p2p=all-p2p???? action=drop comment=No P2P十三：限制每台机最大的TCP线程数(线程数=60) / ip firewall filter add chain=forward protocol=tcp connection-limit=60,32 action=drop \ ?????? disabled=no十四：一次性绑定所有在线机器MAC :f