基于模态测试及有限元法的叶片失谐参数识别-中国测试.PDFVIP

第41卷第 11期 中国测试 Vol.41 No.11 2015年 11月 CHINA MEASUREMENT TEST November，2015 doi院10.11857/j.issn.1674-5124.2015.11.004 基于模态测试及有限元法的叶片失谐参数识别 1 1 2 张 亮 袁 李 欣 袁 袁惠群 （1.辽宁工业大学机械工程与自动化学院，辽宁 锦州 121001；2.东北大学机械工程与自动化学院，辽宁 沈阳 110819） 摘 要院针对现有叶片失谐参数选择及识别方法存在的不足袁提出一种基于模态测试与有限元法相结合的叶片失谐参 数识别方法遥以某压气机一级叶片为研究对象袁通过模态测试获得叶片一阶弯曲固有频率遥对叶片弹性模量引入扰动参 数袁采用弹性模量改变模拟叶片失谐遥基于有限元法识别出与叶片模态测试一阶弯曲固有频率对应的失谐扰动参数与失 谐弹性模量袁采用拟合计算获得各叶片失谐参数遥 结果表明院叶片失谐弹性模量与一阶弯曲无量纲固有频率测试值之 间为近似线性关系曰该方法识别速度较快且准确度高袁可广泛应用于航空发动机尧燃气轮机尧汽轮机叶片的失谐参数识别遥 关键词院模态测试曰有限元法曰失谐叶片曰参数识别曰弹性模量 文献标志码院A 文章编号院1674-5124渊2015冤11-0016-04 Mistuning parameter identification of blades based on modal testing and finite element method 1 1 2 ZHANG Liang ，LI Xin ，YUAN Huiqun （1.Faculty of Mechanical Engineering and Automation, Liaoning University of Technology， Jinzhou 121001，China； 2.School of Mechanical Engineering and Automation，Northeastern University，Shenyang 110819，China） Abstract: To solve the deficiency in selection and identification of mistuning parameters at present，a new way has been proposed to identify the mistuning parameters based on both modal testing and finite element method. During the experiment，compressor blades were taken as research objects. The natural frequency for first-order bending of the blades was measured using the modal testing. Perturbation parameters were introduced to elastic modulus while the later were changed to stimulate the m