SECO Injector中英文对照.docxVIP

SECO Injector Instructions v2SECO激活器使用说明================================================================================SppExtComObj (SECO) Injector Hook with an integrated KMS Server - no external/separate KMS Server or service is needed 集成KMS服务器-无需外部/分离式KMS服务器或任务 ================================================================================Version : 2.4.2 - activates 32bit 64bit Windows 7 with without SP1, Windows 8 8.1. Does not activate Windows Vista.2.4.2版可以激活32位及64为windows 7及windows 8 及8.1.SECO Injection loading allows a one-time activation for either 180 or 45 day grace period, depending on your Windows version可以因系统不同一次性激活180天或45天。 ================================================================================To load the 64bit injection (for 32bit injection - replace ..._x64 commands with ..._x86 without ):64位激活器使用方法（装在32位时- 把..._x64命令换成..._x86即可） 1. Extract all downloaded archive files to C:\SECO Injector\ or a directory of your choice解压缩所有下载的文件至目录C:\SECO Injector\或者自建目录 2. Run the Settings.reg file within the directory and press Yes if youre asked to continue双击运行Settings.reg，在出现的确认窗口点击“确认”继续下一步 3. Use a right-click to open Command Prompt and select Run as Administrator 在屏幕右下角开始图标上点击鼠标右键，选择其中的“命令提示符（管理员）” 4. Enter or copy paste the following commands without and press Enter on after each command line: 依次输入或者拷贝下列命令（不带引号），并依次回车确认 slmgr /ckms slmgr /skms 8.7.8.7 或者 slmgr /skms 自定IP地址 不带 引号 cd C:\SECO Injector\ 或者 cd 自建目录地址 不带 引号 SECOInjector_x64.exe /s 8.7.8.7 /f /l 或者 SECOInjector_x64.exe /s 自定IP地址 /f /l 不带 引号. (如出现0x1 故障即表示成功 ) slmgr /ato You should be receiving a successful activation message 应该马上就会出现激活成功信息 To unload the 64bit injection (for 32bit injection - replace ..._x64 commands with ..._x86 without ): 卸载64位激活器（卸载32位的话，把..._x64命令换成..._x86即可） 1. Use a right-click to open Command Prompt and select Run as Administrator 在屏幕右下角开始图标上点击鼠标右键，选择其中的“命令提示符（管理员）” 2. Enter or copy paste the following commands without and press Enter after eac