linux-C实现GPRS发送短信.docVIP

另附Linux下GPRS模块发送短信的C语言代码，由于时间匆忙没有注意内存对齐、代码优化等细节，望广大读者见谅，有何疑问或建议请发邮件: hostfj@163.com farsight.fj@ 以下代码在ubuntu下通过gcc编译运行测试通过； arm-linux-gcc交叉编译后并在s3c2410下运行测试通过。 ====================================================================== #include termios.h #include stdio.h #include stdlib.h #include unistd.h #include fcntl.h #include string.h #include sys/types.h #include sys/stat.h struct message_info{ char cnnu[16]; char phnu[16]; char message[128]; }; struct pdu_info { char cnswap[32]; char phswap[32]; }; void serial_init(int fd) { struct termios options; tcgetattr(fd, options); options.c_cflag |= ( CLOCAL | CREAD ); options.c_cflag = ~CSIZE; options.c_cflag = ~CRTSCTS; options.c_cflag |= CS8; options.c_cflag = ~CSTOPB; options.c_iflag |= IGNPAR; options.c_oflag = 0; options.c_lflag = 0; cfsetispeed(options, B9600); cfsetospeed(options, B9600); tcsetattr(fd,TCSANOW,options); } void swap(char number[],char swap[]) { char ch1[] = 86; char tmp[16]; int i; memset(swap,0,32); memset(tmp,0,16); strcpy(swap,number); strcat(swap,f); strcat(ch1,swap); strcpy(swap,ch1); for(i = 0;i = strlen(swap) - 1;i += 2){ tmp[i + 1] = swap[i]; tmp[i] = swap[i + 1]; } strcpy(swap,tmp); } int send(int fd,char *cmgf,char *cmgs,char *message) { int nread,nwrite; char buff[128]; char reply[128]; memset(buff,0,sizeof(buff)); strcpy(buff,at\r); nwrite = write(fd,buff,strlen(buff)); printf(nwrite=%d,%s\n,nwrite,buff); memset(reply,0,sizeof(reply)); sleep(1); nread = read(fd,reply,sizeof(reply)); printf(nread=%d,%s\n,nread,reply); memset(buff,0,sizeof(buff)); strcpy(buff,AT+CMGF=); strcat(buff,cmgf); strcat(buff,\r); nwrite = write(fd,buff,strlen(buff)); printf(nwrite=%d,%s\n,nwrite,buff); memset(reply,0,sizeof(reply)); sleep(1); nread = read(fd,reply,sizeof(reply)); printf(nread=%