avr1628稳定显示模块c程序,解决数码管显示刷新问题.docVIP

avr1628稳定显示模块c程序,解决数码管显示刷新问题 #include iom16v.h #includemacros.h #define uint unsigned int #define uchar unsigned char #define HIGH 1 #define LOW 0 #define TRUE 1 #define FALSE 0 #define ZERO 0 #define MSB 0x80 #define LSB 0x01 //max7219 part #define DECODE_MODE 0x09 #define INTENSITY 0x0A #define SCAN_LIMIT 0x0B #define SHUT_DOWN 0x0C #define DISPLAY_TEST 0x0F #define STB PB3 #define CLK PB2 #define DATA PB1 uchar address_1[]={0x01,0x02,0x04,0x08}; uchar dat_1[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e}; //共阳 uchar address_2[]={0xfe,0xfd,0xfb,0xf8}; uchar dat_2[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71,0x00}; //共阴 //code discode[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};//共阴 //uchar Datatab[]={0x40,0x79,0x24,0x30,0x19,0x12,0x03,0x78,0x00,0x18};//共阳 uint ad_data,i,k,l,num; uint wanwei,qianwei,baiwei,shiwei,gewei; //function define /***********************************************************************/ void delay_ms(uint ms) { uint x,y; for(x=0;xms;x++) for(y=0;y1141;y++); } //test program display from 1~ /***********************************************************************/ void Write_sm1628_byte(unsigned char temp) { unsigned char i,t; for (i=0;i8;i++) { t=(tempLSB); if(t==0x01) PORTB|=(1DATA); //DIN else PORTB=~(1DATA); //clk=0 PORTB=~(1CLK); temp=1; PORTB|=(1CLK); } } /***********************************************************************/ void Write_sm1628(unsigned char command) { PORTB=~(1STB); Write_sm1628_byte(command); PORTB|=(1STB); PORTB|=(1DATA); } /***********************************************************************/ void init_sm1628(void) { PORTB|=(1CLK); PORTB|=(1STB); PORTB|=(1DATA); } void display_1() { uint y,j=0; Write_sm1628(0x03); //设置显示模式 Write_sm1628(0