上汽通用别克汽车维修手册-hbd8AVX.pdfVIP

SECTION 8A - VX SERIES BODY KIT ALLOY WHEELS 1.0 GENERAL INFORMATION This Section of the Holden By Design Service Supplement describes the service procedures for the aerodynamic body styling kit components and alloy wheels available for VX Series vehicles. The body styling kit consists of: - Radiator grille insert for Level 1 vehicles, - Two front aprons; one for Level 1 vehicles and one for Level 2 and Level 3 vehicles, the later requiring a modification where fog lamps are fitted, - Unique side skirts, - Two rear aprons; one for Level 1 vehicles and one for Level 2 and 3 vehicles, - Three decklid spoilers, Types 1, 2 or 3 depending on customer option and, - Exhaust extension for Level 2 and 3 vehicles. A choice of four uniquely styled alloy wheels are available: - 17” x 8” X-series 8 spoke alloy wheels fitted with 235/45 V-rated tyres, - 17” x 8” C-series 5 spoke alloy wheels fitted with 235/45 V-rated tyres, - 17” x 8” RT-series 5 spoke alloy wheels fitted with 235/45 V-rated tyres, - 16” x 7.5” T-series multi spoke alloy wheels fitted with 225/50 V-rated tyres. When a complete package is fitted, a Holden By Design identification plate and decals are included as part of the package. NOTE: Vehicles can be supplied with only one or several of the components. In this case no Holden By Design badging is included. Figure 8A-1 illustrates the VX Series body kit major components and alloy wheels. For information not contained in this Section, refer to Section 1 BODY in the VX Series Service Information. 1.1 MAJOR COMPONENTS Figure 8A-1 Legend 1. Front apron - Level 1 / Level 2 3 8. Alloy Wheel: - 17” x 8” X-series 8 spoke 2. Side skirt