斯巴鲁汽车IPMREZA WRX STI翼豹维修手册-02. Power Steering System.pdfVIP

W1860BE.book Page 5 Tuesday, January 28, 2003 11:01 PM POWER STEERING SYSTEM POWER ASSISTED SYSTEM (POWER STEERING) 2. Power Steering System A: HYDRAULIC SYSTEM The fluid pump is directly driven by the engine through a belt. The fluid flow is maintained almost constant regardless of change in the engine speed by the function of the flow control valve. The flow-regulated fluid is delivered to the control valve through hose A. When the steering wheel is turned, the rotary control valve connected to the pinion shaft opens the hydraulic circuit corresponding to the direction in which the steering wheel is turned. The fluid then flows into chamber A or B via pipe A or B. The fluid pressure in chamber A or B acts on the rack piston in the same direction as that in which the rack shaft is moved by rotation of the steering wheel. This helps reduce the effort required of the driver to operate the steering wheel. Movement of the rack piston causes the fluid in the other chamber to return to the reservoir tank via pipe A or B, control valve, and hose B. As the steering shaft is connected to the pinion shaft mechanically via the rotary control valve, the steering system can operate as a manual system even if the hydraulic system becomes inop- erative. To control the maximum fluid pressure, a relief valve is built into the fluid pump to prevent build- up of an excessive fluid pressure. PS-5 W1860BE.book Page 6 Tuesday, January 28, 2003 11:01 PM POWER STEERING SYSTEM POWER ASSISTED SYSTEM (POWER STEERING)