A27A27M 中文：通用碳素钢铸件的标准规范.pdf

Designation: A 27/A 27M – 03 Standard Specification for Steel Castings, Carbon, for General Application1 This standard is issued under the fixed designation A 27/A 27M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope * A 370 Test Methods and Definitions for Mechanical Testing of Steel Products2 1.1 This specification covers carbon steel castings for gen- eral applications that require up to 70 ksi [485 MPa] minimum A 732/A 732M Specification for Castings, Investment, Car- tensile strength. bon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures3 NOTE 1—The grades covered by this specification represent materials A 781/A 781M Specification for Castings, Steel and Alloy, that are suitable for assembly with other steel castings or wrought steel 3 Common Requirements, for General Industrial Use parts by fusion welding. It is not intended to imply that all these grades possess the same degree of weldability