铝液含氢量炉前定量检测及除气工艺的影响.pdfVIP

第五届中国国际压铸会议论文集 铝液含氢量炉前定量检测及除气工艺的影响 吴树森，毛有武，许四祥，李西前，安萍 (华中科技大学模具技术国家重点实验室，湖北武汉430074) 摘要：利用自主开发的铝液含氢量定量检测系统检测了铝液的含氢量。研究了无毒除气剂、六氯乙 烷(czcls)、氩气三种除气剂对ZLl02铝合金熔体的除气效果，结果表明在相同条件下，铝熔体采 用C2C1s的除氢效果最好，但对环境有污染。采用氩气对铝熔体进行旋转除气，通气时间越长除气 效果越好，除气完成后，在一定时间内，静置时间越长熔体含氢量越低。 关键词：铝合金；含氢量；除气；测氢 QuantitativeMeasurementof in Level Hydrogen AluminumMeltandtheEffectof Processes Degassing WU Shu—sen，MAOYou-WU，XU Si—xiang，ElXi—qian，ANPing (StateLab．ofMold＆Dies ofScienceand Key University Technology，Huazhong Technology， Wuhan 430074，Hubei，China) contentinaluminummelt Abstrad：The hasbeenmeasuredwitha hydrogen self—developedquanti— tativemeasurement effectsoftheinnoxious and system．Thedegassing degassingflux，C2C16argon onZLl02AI—Si melthavebeenstudied resultsshow gas thatthe alloy respectively．The degassing effect0fQCl6isbetterthantheothersinthesameconditions．but计isharmfUItoenvironment．The effectsof willincreasewhenthe time thede— rotarydegassing argongas blowingprolongs，and effectsof willincreasewhenthe time withina certain——timeafter gassing argongas stayingprolongs finished。 degassing words：aluminum detection Key alloy；hydrogenlevel；degassing；hydrogen