水星50燃气轮机发电机.pptVIP

Mercury 50先进燃气轮机发电机系列 4200 kWe 40% 热效率 当前的能源市场 能源用户 – 需要有竞争力和 可靠的电力供应 能源提供者 – 需要优化在天然气和发电等能源领域销售利润，同时提供有竞争力和可靠的能源 为什么是水星50?电力企业的好机会 项目目标 高效率, 40%- 8700 Btu/kW-hr 单位费用低廉- 安装结束后每千瓦费用为$450 到 $500 低排放 灵活 可再布置 常规燃气轮机运行规律 回热循环方式 Mercury 50 先进燃气轮机流程图 先进技术 回热器(PSR)总成表面 独有专利 同燃气轮机热循环设计一体考虑 效率高90% 可靠性高 经验 - 累计2,000,000+ 小时- 交货超过1000台 功率等级目标 为了取得更好的可靠性和灵活性进行等级设计 取得最小寿命循环支出 功率等级选择基于每年的运行小时数 索拉在工厂中设定功率等级 功率等级选项规则 可用功率 在部分功率情况下也有良好的效率 CHP / 热电联产性能 服务特点 最小寿命循环支出 高可靠性和可用率 内部模块每3到6年更换或维护 模块服务 vs 交换机组- 最大可用率 Mercury 50 发电机组箱体 紧凑, 模块设计 良好的声音屏蔽效果 集成电厂控制 减小现场工作 易移动 经济性 应用 小电网基础负载 电网备用 现场发电 远距供电 CHP / 热电联产 概要 费用低廉的能源 高可靠性和利用率 灵活的解决方式 The Mercury 50 thermodynamic cycle and unique flow path have been integrally designed around the recuperator from the outset. In the Mercury 50 gas turbine, air is drawn into the air intake manifold where it is then compressed by the 10-stage axial compressor. The compressed air then enters the recuperator where it is preheated by the turbine exhaust gas. The pre-heated, compressed air then enters the annular combustion chamber where fuel is added until the proper design turbine inlet temperature is reached. The hot combustion gas is then expanded and driven over the power turbine section where it is converted into shaft power that is used to drive an electrical generator. The exhaust gases then enter the exhaust duct and then flow through the recuperator where they are used to preheat the compressed air exiting the compressor section as previously discussed. There are four primary technology advancements that make the Mercury 50 gas turbine the most efficient, durable and environmentally superior gas turbine is its size range. 1. The Advanced Component Engine (ACE) Compressor utilizes the latest aero design codes to increase the component efficiency of this compressor section by two points compared to traditional designs. In addition, wide-chord airfoils are used to reduce the blade count by 40% over traditional approaches.