LCD_LM3033B-OBR2驱动程序.docVIP

LCD_LM3033B-OBR2驱动程序 LM3033B液晶驱动程序 /****************************************************************** LM3033B液晶驱动程序： 作者：触电 时间：2007年2月3日 主控芯片 ：AT89X51 晶振：11.0592MHZ 接线图： 数据：P1口； RS = P3^0; RW = P3^7; E = P3^6; *******************************************************************/ #include reg52.h #include intrins.h sbit RS = P3^0; sbit RW = P3^7; sbit E = P3^6; #define Lcd_Bus P1 void delay(unsigned int t) { unsigned int i,j; for(i=0;it;i++) for(j=0;j10;j++); } void write_com(unsigned char cmdcode) { RS=0; RW=0; E=1; Lcd_Bus=cmdcode; E=0; delay(5); } void write_data (unsigned char Dispdata) { RS=1; RW=0; E=1; Lcd_Bus=Dispdata; E=0; delay(5); } void lcdinit() { delay(2000); write_com(0x30); delay(10); write_com(0x30); delay(5); write_com(0x0c); delay(10); write_com(0x01); delay(500); write_com(0x06); delay(0); } void hzkdis(unsigned char code *s) { while(*s0) { write_data(*s); s++; delay(50); } } void ceshi() { write_com(0x01); delay(5); write_com(0x82); hzkdis(TOPWAY); write_com(0x90); hzkdis(西安科技大学科技创新实验室制作); write_com(0x88); hzkdis(激情创造精彩无限); } void gundong() { } void Disp_Img(unsigned char code *img) { unsigned int j=0; unsigned char x,y,i; for(i=0;i9;i+=8) for(y=0;y32;y++) for(x=0;x8;x++) { write_com(0x36); write_com(y+0x80); write_com(x+0x80+i); write_com(0x30); write_data(img[j++]); write_data(img[j++]); } } unsigned char code BMP[]={ 0x00,0x00,0x00,0x00,0x38,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x20,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x7F,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x3E,0x00,0x00,0x00,0xE0,0x18,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00, 0xE0,0x00,0x00,0x01,0xA0,0x30,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00, 0x80,0x80,0x00,0x03,0x00,0xF0,0x00,0x00,0x00,0x3E,0x00,0x00,0x00,0x00,0x00,0x00, 0x80,0x80,0x00,0x07,0xFF,0x90,0x00,0x00,0x00,0x20,0x00,0x00,0x80,0x00,0x00,0x00, 0xF8,0x81,0x80,0x03,0x00,0xF0