转速测量仪机的车光电转速传感器测控仪中英文资料对照外文翻译文献综述.docVIP

中英文资料对照外文翻译文献综述 附录A 英文原文 Designing the Testing and Controlling Instrument of the Photoelectric Rotating Speed Sensor Based on AT89C52 Abstract Aiming at the necessity of performance test of photoelectric rotating speed sensor and the limitation of traditional testing instruments,by using dual-processormodular structure of AT89C52, a new testing instrument is designed and developed, which is a generation of advanced instrument with practical high performance and high reliability. The photoelectric rotating speed sensor is driven and tested by the instrument.The drive and test of the photoelectric rotating speed sensor are implemented. The hardware design of drive and test circu it module in testing and controlling instrument are introduced, and the software design is also presented by drive and test circu it procedures of step motor. The practical running indicates the developed testing and controlling instrument improves working efficiency and testing objective reality, it has definitely practical value. Key words:Pulse　Sensor　Microprocessor　Stepmotor B.1 Introduction TQG15 locomotive the Photoelectric Rotating Speed Sensoris used for detecting the speed of Railway locomotive vehicle wheel, it provides electric pulse signal for locomotive electric control system,and is one of the main parameters of the locomotive safety, reliability,normal work. To ensure the TQG15 locomotive photoelectric rotational speed sensor quality and performance, The test is very important. The traditional detection devices are based on manual operation, only a few limited performance indicators of detection, there is a high precision and productivity low disadvantages. With the continuous development of electronic technology, especially the Single-chip technology in intelligent instrument widely application, development a new generation of high performance and practical the testing and controlling instrument of the photoelectric sensor is imperative. B.2 TQG15 locomotive the Photoelectric