1.5Mta新井设计毕业设计.doc

 摘 要 本设计包括三部分：一般部分，专题部分和翻译部分。 一般部分是十一矿1.5Mt/a新井设计。全篇共分为十个部分：矿井概述及井田地质特征、井田境界和储量、矿井工作制度、设计生产能力及服务年限、井田开拓、准备方式－采区巷道布置、采煤方法、井下运输、矿井提升与运输、矿井通风与安全和矿井主要经济技术指标。 十一矿井位于河南省平顶山市境内。十一矿位于平顶山市区西北13km处，行政区划属平顶山市湛河区和宝丰县共同管辖。矿井地理坐标为东经113°8′26″～113°11′15″,北纬33°47′30″～33°51′20″。井田南北长8.05 km，东西宽3.25km。设计面积约25.5 km2。二煤层为可采煤层，厚度为7.5m，平均倾角为10°。矿井瓦斯相对涌出量为4.93m3/t属于低瓦斯矿井。 十一矿设计年生产能力为1.5Mt/a，服务年限为64a。矿井工作制度为“三八”制。矿井的采煤方法主要为走向长壁综合机械化放顶煤。矿井为两水平采区开拓。第一水平标高为-500m，第二水平采用暗斜井延深至-700 m。采用立井开拓，主立井主要用于提升煤炭，副立井主要用于提升人员、矸石、和材料等。 矿井采用一矿一面的高效作业方式。工作面长度为240m。运输大巷采用胶带运输煤炭，轨道大巷采用架线式电机车牵引3t的MLC3-6材料车运输矸石和材料等。 矿井通风方式为抽出通风方式，风井布置方式为两翼对角式。 专题部分介绍了矿井水灾防治。 翻译部分的一篇关于无人工作面综合机械化刨煤机机组的研究和应用，题目为“Research and practice of unmanned mining face with full mechanized plow” 关键词：矿井设计；机械化综采放顶煤技术；长壁开采 ABSTRACT This design includes three parts: General part, translation part and special part.The general part is a mine of No.11 mineral 1,500,000t new well in design. The No.11 mine is located in henan pingdingshan territory. 11 in pingdingshan mine in urban northwest 13km, administrative division ZhanHeOu baofeng county of pingdingshans jurisdiction. Together with Mine geographical coordinates for longitude 113 ° 8 ° 26 ~ 113 , 15, 11 ° latitude 33 47 ° ~ 33 30 , 20 51. North-south length 8.05 km, compartmentalized west-east width 325 km. Design area about 25.5 km2. Two coal seam recognize base-level cycle, thickness for 7.5 m, average inclination for 10 °. Mine 246.9 t/h normal section, belong to low gas mine. Coal-dust explosion danger, and coal seam are a spontaneous combustion tendency. The No.11 mine design annual production capacity is up to 1.5 Mt/a, for 64a service life. Mine work system for 38 system. The main methods of mine coal for towards longwall comprehensive mechanized top coal caving. Mine as two levels of mining development. The first level elevation - up to 500mb second level use dark shafts of extending the deep to - 700 m. Adopts vertical shaft expand, Lord, mainly used for ascensio