精选绩效管理培训课件.docVIP

heating, ventilation, and other factors. Spacing between buildings to meet the specifications required by increases for green buildings, ventilation is good. (2) technical measures for energy-saving instructions: 1) roof: insulated roof. Optional overhead insulation layer of insulation or planting the insulating layer. 2) Windows: building on each floor above ground 80mm, beam with full aluminum window, to lighting, and ventilation. Public location lighting control using energy-saving for buildings to extinguish the switch in order to achieve energy-saving effect. Lighting and lamps using high efficiency energy-saving fluorescent lamps, using energy-saving quick-start ballasts or electronic ballast with low harmonic content, in order to achieve energy-saving effect. 5) use water-saving equipment and appliances. Using the closed flush valve, automatic faucets and energy-saving washing tank, etc, reduce the consumption of water resources is invalid, achieve the purpose of saving water. 6) water recovery and reuse. 7) seepage, leakage-proof measures of water supply system. Accessories such as the water supply network for sanitation, must conform to the standards, improve durability, prevents leaks, to achieve the water-saving effect. Unit 3, energy management energy management systems and institutions, strengthen the management of water, electricity, and clear management responsibility for preventing running, running, drip, leak, improved energy-saving effect. The seventh chapter, environmental protection, construction site environment this project is located in XXXXXX, a beautiful natural environment, and no polluting enterprises, environmental air quality good, suitable for construction projects. II, and prepared according to 1, and Peoples Republic of China environmental protection method 2, and construction project environmental protection Management Ordinance (State [1998]253,) 3, and construction project environmental protection design provides (country meter w