产品包装运载体动力学特性研讨.pdfVIP

编号：A11 产品/包装/运载体动力学特性研究? 1 2 3 1 1 王志伟 ;王 军 ;胡长鹰 ;朱勇 ;毛盾 (1.暨南大学包装工程研究所,广东 珠海519070;2.江南大学包装工程系, 江苏 无锡214122;3.暨南大学食品科学与工程系,广东 广州510632) [摘要] 研究产品运输包装系统动力学特性是产品包装设计的基础和依据。 传统的研究中，一般将产品视作整体，并将产品包装系统与运载系统（车辆等） 隔离开来，将实际测取的运载体底板的信号等价为作用于包装系统的激励信号， 并在此基础上获取产品响应，进而进行产品破损评价和优化设计。实际上，产品 包装系统和运载系统一起构成产品运输包装系统，产品破损往往首先出现在关键 部件，传统的包装系统动力学分析方法和产品破损评价手段存在局限性。文中将 产品、包装、运载体作为一整体系统考虑，建立产品运输包装系统模型，应用逆 子结构理论讨论了包装耦合界面参数、产品包装系统固有频率、材料阻尼等对产 品动力学特性的影响，研究结论为产品减振包装设计提供理论依据。 关键词：包装；关键部件；模型；传递函数 Dynamical Characteristics of Product Transportation Packaging System 1＊ 2 3 1 1 WANG Zhi-wei ;WANG Jun ; HU Chang-ying ; ZHU Yong ; MAO Dun (1.Packaging Engineering Institute, Jinan University, Zhuhai 519070； 2.Department of Packaging Engineering, Jiangnan University, Wuxi 214122; 3.Department of Food Science and Engineering, Jinan University, Guangzhou 510632) Abstract: It’s very important to investigate the dynamical characteristics of packaging system for cushioning design.Traditionally,the product was modeled as a lumped mass,neglecting the complex configuration of most products.In fact, product packaging system and vehicle constitute a complex transportational packaging system, and the damage of most products usually occurs firstly at the so-called critical component.In this paper,product/cushioning package/vehicle were treated as a complex system,and the inverse substructuring method proposed by Lim and his partners was applied to analyse the dynamical characteristics of the system.The method was verified, the effect of the elasticity paramet