电子时钟源程序.docVIP

电子时钟源程序 #includereg52.h #includestdio.h #define uchar unsigned char sbit LED0=P3^4; sbit LED1=P3^5; uchar code table[]={0x3f,0x06,0x5B,0x4f,0x66,0x6D,0x7D,0x07,0x7F,0x6F}; //段码 0,1,2,3,4,5,6,7,8,9 uchar code table1[]={0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f}; //位码 uchar oldkey,time_set_flag,rst=0,k,temp,oldyear,oldmonth,oldday,oldh,oldm,olds; int num,year=1999,month=1,day=1; //串口接受缓冲 uchar h=0,m=0,s=0,qh_flag,leap,key=0,count=0,flag,a; uchar sbuf[2],ser_flag,i,j; void delay(uchar xms) { uchar i,j; for(i=xms;i0;i--) for(j=110;j0;j--); } /********************************** P0为位码，P1为段码 **********************************/ void show(unsigned int duma,unsigned int wema) { P0=table1[wema]; P1=table[(duma%100)/10]; delay(5); P1=0x00; wema=wema+1; P0=table1[wema]; P1=table[duma%10]; delay(5); P1=0x00; } void display(unsigned int shi,unsigned int fen,unsigned int miao) { uchar m=0; P0=0xff; show(shi,m); m=m+2; P0=table1[m]; P1=0x40; delay(5); P1=0x00; m++; show(fen,m); m=m+2; P0=table1[m]; P1=0x40; delay(5); P1=0x00; m++; show(miao,m); } /**********矩阵键盘扫描************** P2口作为矩阵键盘扫描 0 1 2 3 4 5 6 7 8 9 set rst 12 13 qiehuan 15 ************************************/ void keyboard() { P2=0xfe; temp=P2; temp=0xf0temp; if(temp!=0xf0) { P2=0xfe; temp=P2; delay(10); temp=0xf0temp; if(temp!=0xf0) { temp=P2; switch(temp) { case 0x7e:key=0;break; case 0xbe:key=1;break; case 0xde:key=2;break; case 0xee:key=3;break; //设置时钟时间 } while(temp!=0xf0) { temp=P2; temp=temp0xf0; } } } P2=0xfd; temp=P2; temp=0xf0temp; if(temp!=0xf0) { P2=0xfd; temp=P2; delay(10); temp=0xf0temp; if(temp!=0xf0) { temp=P2; switch(temp) { case 0x7d:key=4;break; case 0xbd:key=5;break; case 0xdd:key=6;bre