原创力文档- 1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
- 2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
查看更多
离心铸造TC4合金冷速对其组织和力学性能的影响-中国有色金属学报
20 4 2010 4
Vol.20 No.4 The Chinese Journal of Nonferrous Metals Apr. 2010
1004-0609(2010)04-0667-07
TC4
1 1 1 2 2
(1. 150001
2. , 100095)
Ti-6Al-4V(TC4)
M 7.00 mm
α/β
TC4
Ti-6Al-4V
TG249.4 TG146.2+3 A
Effect of cooling rate on structure and tensile strength of
centrifugally cast TC4 alloy in ceramic-shell mold
1 1 1 2 2
JIA Li-min , XU Da-ming , GUO Jing-jie , BAI Shi-hong , WANG Hong-hong
(1. School of Materials Science and Technology, Harbin Institute of Technology, Harbin 150001, China;
2. Beijing Institute of Aeronautical Materials, Beijing 100095, China)
Abstract: Both the experimental analyses and computer simulation were conducted to determine the statistical
relationship between the structures and mechanical properties of centrifugally cast TC4 alloy in ceramic-shell mould. The
results show that, when the cast modulus (M) is smaller, the modulus has significant influence on the cooling rate. But
with increasing modulus, the influence of modulus on the cooling rate is weakened while M is larger than 7.00 mm. The
grain size, α/β lamellar thickness and secondary dendrite arm spacing all increase with increasing the casting module or
decreasing the cooling rate, while the tensile strength varies in an opposite changing manner. The regression functions for
the corresponding relationships are given according to the present investigations.
Key words: Ti-6Al-4V alloy; centrifugal casting; structure; tensile strength; cooling rate; cast modulus
文档评论（0）