轧制变形量对AZ80镁合金组织与性能的影响.PDFVIP

下半月出版 Material Heat Treatment 材料热处理技术 轧制变形量对AZ80 镁合金组织与性能的影响 李伟东1,2 1 2 2 2 , 周海涛 , 陈和兴 , 戚文军 , 郑开宏 (1. 中南大学 材料科学与工程学院, 湖南 长沙 4 10083; 2. 广州有色金属研究院 材料加工所, 广东 广州 51065 1) 摘 要 研究了不同轧制变形量对AZ80 合金组织及性能的影响遥 结果表明袁AZ80 合金的抗拉强度随轧制变 形量的增加有所提高袁而伸长率则随着变形量的增加先增加后减小遥变形量为25% 50% 80%的AZ80 合金其屈服强 度分别为200 146 205 MPa 曰抗拉强度分别为245.52 249.08 279.49 MPa 曰伸长率分别为 15.8% 24.2% 19.1%曰其晶粒 平均尺寸分别为30 10 3 遥 关键词 轧制曰AZ80 合金曰力学性能曰变形量 中图分类号 TG335.5 文献标识码 A 文章编号 Effect of Rolling Deformation on Microstructure and Properties of AZ80 Alloy 1,2 1 2 2 2 LI Weidong , ZHOU Haitao , CHEN Hexing , QI Wenjun , ZHENG Kaihong ( 1. Sc hool of Mate rials Scie nce and Enginee ring, Ce ntral South Unive rs ity, Changs ha 4 10083, China; 2. Ins titute of Mate rials Process ing, Guangzhou Research Institute of Non-fe rrous Me tals, Guangz hou 51065 1, China) Abstract 院The effects of deformation extent on the microstructure and mechanical properties of AZ80 alloy were studied. The results show that with the increase of deformation extent, the tensile strength increases, the elongation increases firstly and then reduces. After 25%, 50% and 80% deformation, the yield strength of the samples is 200 MPa, 146 MPa and 205 MPa; the tensile strength is 245.52 MPa, 249.08 MPa and 279.49 MPa; the elongation is 15.8%, 24.2% and 19.1%; the grain size i